Model： SH01 Leather creaser

Digital display numerical control temperature

Voltage: 110-240VAC  50/60Hz

• the temperature accurately to 1oC (with overcurrent protection).

• Vegetable-tanned leather creasing work usually 100oC - 200oC

• Chrome tanned leather creasing work usually 150oC - 250oC

• Hot foil stamping work usually 100oC - 150oC

• Embossing logo work usually 180oC (wet leather result better)

• The edge oil temperature is generally 350oC-400oC),
  this tool design for leather creasing work, low head easy control pressure.
  for edge oil usually request more than 350oC,

• so Not recommend keep 400oC continuous work for more than 40mins,(the handle will a little hot), if you request all-day work it in up more than 500oC, PLS contact to us take Hight head tools

• The first use of copper head parts will cause smoke, blackening, and a peculiar smell, which is normal

The handle is held in a low position, the head length is half of the other brand machines, so it can do fine control better.

It adopts a built-in heating body, which is safer and has less heat loss.

Double insulation with hollow and reflective film, better insulation effect.

It has the functions of automatic sleep and automatic shutdown. The host detects whether the handle does not vibrate for a long time. If it does not vibrate for a long time, it will enter the sleep mode after the set time. The standby temperature of the sleep mode can be set freely, and the time and temperature can be set freely

Control box size: 130x90x42mm

Control box Material in plastic, handle in hardness wood

Made In China